Dana outlines downspeeding strategies in White Paper

April 1, 2015

Dana Holding Corporation has published a new white paper for the commercial trucking industry that addresses the need for fleets and original-equipment manufacturers to properly manage the higher driveline torques that are resulting from the increasing use of more fuel-efficient downsped engines.

Titled “The Right Solution for Downsped Engines,” the paper is free and may be downloaded at: www.danacv.com/downspeedingwhitepaper.

Authored by Andy Nieman, vice-president of global engineering for Dana Commercial Vehicle Technologies, it describes the motivations behind downspeeding, what constitutes downspeeding, and fuel consumption and environmental benefits. The piece goes on to explain how the resulting higher torques place added stress on a vehicle’s axle, driveshaft, and inter-axle.

Different strategies are then presented for managing the higher torques, including Dana’s recommendation for specifying proper driveline components.  These components, the paper explains, need to be carefully engineered, thoroughly tested, and proven to be fully capable of delivering the necessary performance in a high-torque environment.

Charts are also provided to help illustrate the data provided and support Dana’s conclusions.

The Dana system optimized for engine downspeeding includes the Spicer AdvanTEK 40 tandem axle, the SPL 350 driveshaft, and the SPL 250 inter-axle shaft.

The Spicer AdvanTEK 40 axle is now available with ratios that support the engine downspeeding efforts of truck manufacturers, including the industry’s fastest axle ratio of 2.26:1. The Spicer AdvanTEK 40 tandem axle was developed with faster axle ratios to handle the higher axle input torques that result from lowering engine rpm at highway cruise speed, which enables increased overall vehicle efficiency of up to 2%.

Ultimately, the Spicer AdvanTEK 40 axle can help a truck operating in a typical linehaul duty cycle save more than 2,700 gallons of diesel fuel over a five-year time span. This translates into up to $10,000 in estimated operating savings and a reduction of over 60,000 pounds in carbon dioxide output when compared with most tandem axle offerings on the road today.

The other piece of Dana’s engine downspeeding solution is the SPL 350 driveshaft and SPL 250 inter-axle shaft, which have been engineered to maximize the efficiency and durability of the Spicer AdvanTEK 40 tandem axle and low-rpm engines. The most robust heavy-duty driveshaft and inter-axle shaft in their class, the SPL 350 driveshaft and SPL 250 inter-axle shaft offer more power density, 40% more torque carrying capability, and double the bearing life over competitive designs. In fact, they are the only driveshaft and inter-axle shaft on the market today that can supply up to a million miles of life expectancy in a downsped engine powertrain.

For more information, visit www.danacv.com/advantek40.