Mouvex offers CC20 Eccentric Disc pumps
Jan 10, 2011 3:05 PM
Mouvex has introduced the CC20 Eccentric Disc truck transport pumps to the North American market. The CC20 was developed as a vehicle-mounted system for loading and unloading transports, while its design also enables it to be used as a ground-based pumping unit.
CC20 pumps incorporate eccentric disc pump technology that consists of a stationary cylinder and disc that is mounted to an eccentric shaft. As the eccentric shaft is rotated, the disc forms chambers within the cylinder, which increase at the suction port and decrease at the discharge port. During operation, the discharge pressure exerts itself against the eccentric disc, preventing it from slipping. This low slip between the disc and cylinder gives the CC20 eccentric disc pumps superior self-priming and line stripping capabilities.
CC20 pumps are also compact, providing reduced weight and easy installation. The pumps are available in cast-iron, with optional bronze pistons and stainless steel shafts, and have built-in relief valves to protect the pump from overpressure situations. Special CC20 models are available for “solvents” and “waste oil and lubricants” applications that require the pumping of difficult-to-handle products. The CC20 is available with flow rates up to 158 gpm (35 m3/h) with pump speeds up to 750 rpm maximum. Optional features include drain plugs, and direct drive through PTO driveshaft or hydraulic motor drive. CC20 pumps should be considered for waste oils; chemical applications that involve transfer of soda, silicates, emulsions, inks, adhesives, and resins; petrochemical applications that require handling of solvents, fuels, crude oil, paraffin, gas oils, and asphalt; lubricants; molasses; oils; and clean water.
© 2013 Penton Media Inc.